Woodburned Vampire Bat Box

This woodburned vampire bat box uses a Bat Sign from Walnut Hollow’s new Halloween and Harvest wood line. The Creative Versa-Tool is great for adding bat details to the rustic sign. The Cornice Box is smooth for easy painting. It’s … Continue reading

How to make a charging station cord box

Charging Station cord box, Stefanie Girard, Walnut Hollow

With the new school year season upon us thoughts turn to organizing along with new supplies and books.

We all have electronics as a part of out lives that need to be charged and it’s confession time for me…this is what my electronic charging area looks like:

Walnut hollow charging station cord box stefanie girard

Can you say, “oy”!? Well Walnut Hollow boxes to the rescue!

If your world looks like mine read on for the tutorial on how to make a charging station cord box.

Walnut Hollow box charging cords

Supplies and Tools:

1 Basswood Classic Box 3219

Professional Rotary Tool 29637

Drill bits

White Paint

Brush

Circle template

Pencil

Sand paper and sanding bits

Walnut Hollow box

Determine the sizes of the holes based on your cord widths and the number of holes you need.

If your cords and electronics are larger choose another size Walnut Hollow Box to accommodate your charging cord needs.

How to drill holes in a box, hide charging cords

Draw the necessary holes and the cross line marks. Drill holes in the box by aligning the tip of the drill bit on the center of the crossed lines.

Walnut Hollow box charging station, stefanie Girard

Once you have all your holes drilled sand the edges with the  Professional Rotary Tool.

charging staion cord box, steafnie Girard

For a final touch I painted the box white for a clean tidy look. I sanded the edges again after the paint was dry for a slight “shabby chic” look.

I hope you’ll try making a charging station box to tidy up your world of electronic cable madness.

Thanks for taking time to check out this tutorial and if you’d like to see more of my crafting with a re-purpose and adult coloring pages pop on over to my blog Sweater Surgery.

Stefanie Girard with scissors

Stefanie Girard is a crafter with a re-purpose. She has been cutting stuff up since she was old enough to hold a pair of scissors in her tiny hands. She earned her degree in Industrial Design from Pratt Institute and move to Los Angeles to work in the entertainment industry first as a Set Decorator and Prop Master then onto TV Producer specializing in How-To TV shows for HGTV and the DIY Networks. After writing 5 craft books for the Quarto Publishing Group she now spreads the crafty word online through book reviews and original projects with a focus on recycled elements.

Craft_Buy2Get3Free_WEBBNR

How to make a computer lap desk

I mostly work with my computer on my lap sitting on the couch. Why would sit at an uncomfortable desk chair when I can lounge on my couch and get the same work done? But the warmth of the computer can be uncomfortable in the summer heat. (A benefit in the winter though!) And storage….can we ever really have too much? So, if all this sounds like your world why not make yourself a vented computer laptop desk out of a Walnut Hollow Basswood Cornice box.

computer laptop desk, box storage, stefanie girard

vented laptop computer desk box, stefnaie girard, walnut hollow

box for storage computer laptop lap desk, stefanie girard

Materials and Tools

Basswood Cornice box

Professional Rotary Tool 29637

Drill bits

Fabric

Batting

Trim

Hot Glue Gun

Pencil

Scrap paper

Scrap wood

IMG_2169

Cut two rectangles of batting a bit larger than the box so they will wrap around the edge. Cut one a bit larger than the other and trim the corners to reduce bulk.

IMG_2174

Cut a piece of fabric a few inches bigger than the batting. Set these aside for later after you drill the holes in the lid.

IMG_2176

Place a piece of paper on the lid and then your laptop to see where the little feet on the computer are. You will want to avoid drilling holes near the feet. Sketch out a pattern of different size holes to use as a rough guide.

IMG_2182

Place pieces of scrap wood and paper to fill the interior of the box. This will help reduce splintering on the inside of the lid. You can see in the open photo above I left this step out on the first large hole I drilled and the inside of the wood box split more than the others.

IMG_2177

You are now ready to drill the vent holes in the lid that will help keep your laptop cool.

IMG_2180

Draw down the drill bit to poke through the paper. This will mark the center spot on the wood lid through the paper.

IMG_2181

Drill a variety of holes in the lid starting with the largest size first, then medium, and then fill in spaces with small holes.
How to make a computer lap desk Walnut Hollow, steafnie Girard

Once you have all your holes drilled give them a sanding with the Professional Rotary Tool.

Now would be the time to paint it if you like. I liked the natural wood so I left it as it is.

All that is left to do is to hot glue the fabric to the box.

Trim off the excess fabric and glue a strip of trim around the parameter to hide all the rough edges and glue.

I hope you’ll try making this fun computer lap desk with your favorite fabric.

Thanks for taking time to check out this tutorial and if you’d like to see more of my crafting with a re-purpose and adult coloring pages pop on over to my blog Sweater Surgery.

Stefanie Girard with scissors

Stefanie Girard is a crafter with a re-purpose. She has been cutting stuff up since she was old enough to hold a pair of scissors in her tiny hands. She earned her degree in Industrial Design from Pratt Institute and move to Los Angeles to work in the entertainment industry first as a Set Decorator and Prop Master then onto TV Producer specializing in How-To TV shows for HGTV and the DIY Networks. After writing 5 craft books for the Quarto Publishing Group she now spreads the crafty word online through book reviews and original projects with a focus on recycled elements.

Craft_Buy2Get3Free_WEBBNR